EPDM Rubber Roofing in Hertfordshire, Hampshire & Surrey
TNR Roofing Services fits single-sheet EPDM rubber membranes on extensions, garages, dormers and commercial flat roofs, with a free survey before any quote.
Request a Free Quote
Start with your name and number. It takes under a minute.
- Free Roof Surveys
- 24/7 Emergency Response
- Fully Insured
- Herts, Hants & Surrey
EPDM Rubber Roofing
Single-Sheet EPDM Membranes Explained
EPDM is a synthetic rubber membrane supplied in large sheets, so most domestic flat roofs can be covered in one piece with no joins across the main area. It is bonded to a clean timber deck with adhesive, then finished with trims at the edges and upstands at the walls. Because the rubber stays flexible, it copes with the movement caused by hot summers and freezing winters, and it does not crack with age the way older felt often does.
That flexibility comes with trade-offs worth knowing. The surface is a plain matt black rather than the coloured topcoat available with GRP, and the membrane is softer, so a balcony in daily use is usually better served by fibreglass. On a small garage, felt can also cost less. Where EPDM excels is a larger roof, an extension or a commercial building, where fewer seams mean fewer places for water to get in. TNR lays it for homes and businesses across Hertfordshire, Hampshire and Surrey.
Reviews
What Our Customers Say
Reviews from customers who have used TNR Roofing Services for epdm rubber roofing and other roofing work.
What's included
EPDM Rubber Roofing Work We Undertake
The main parts of the job, each listed in your quote.
- Covering flat roofs with a single EPDM sheet, cutting out the joints where leaks usually begin.
- Bonding the membrane fully to a new or repaired timber deck so wind cannot lift it.
- Forming upstands and corners at walls so the rubber turns up and seals each junction.
- Fitting edge trims and gutter drip details that hold the membrane securely and guide water away.
- Repairing punctures and lifted edges on existing EPDM roofs with compatible rubber patches and adhesive.
- Re-roofing larger commercial flat roofs, where wide EPDM sheets reduce the number of seams across the area.
Request a Free EPDM Roof Survey and Quote
Free surveys and no-obligation quotes for epdm rubber roofing across Hertfordshire, Hampshire and Surrey.
Our work
Our Epdm Rubber Roofing Work
Why choose us
Reasons to Choose TNR for EPDM Rubber Roofs
All Three Systems Compared
Because we install EPDM alongside felt and GRP, you get a balanced view of whether rubber is the best fit for your roof.
Free Survey Before Quoting
We measure the roof and check the deck first, so the sheet size, trims and adhesive in your quote match the real job.
Extensions to Commercial Units
EPDM suits a single-storey extension as well as a business premises, and we fit it on both.
Insured Work on Every Roof
Our public liability insurance covers every EPDM installation we carry out across Hertfordshire, Hampshire and Surrey.
About TNR Roofing Services
A Local Roofer for EPDM Rubber Roofing
TNR Roofing Services is based in Hemel Hempstead and works on homes and commercial buildings across Hertfordshire, Hampshire and Surrey. The roof is inspected before any price is given, every job is covered by public liability insurance, and a 24/7 emergency response is there if a leak or storm damage cannot wait.
Free roof surveys
No-obligation quotes
Pricing
Factors That Set the Price of an EPDM Roof
EPDM roofs are quoted after a free survey, and the price reflects the following points.
- The roof area and whether it can be covered in one sheet or needs a joined seam.
- The state of the existing deck and any boards that need replacing before bonding.
- The number of upstands, corners, pipes and roof lights the membrane must be sealed around.
- The length and style of edge trims and gutter details required.
- Removal of the old covering and access to the roof, especially on commercial buildings.
The work
How an EPDM Rubber Roof Is Installed
The main stages of the job, from the first inspection to the final check.
Measuring and Deck Assessment
We measure the roof to size the membrane and check the deck for rot, movement or damp before recommending EPDM.
Preparing a Clean, Dry Deck
The old covering comes off, damaged boards are replaced and the surface is swept clean, as the adhesive needs a dry, dust-free base.
Laying and Bonding the Membrane
The EPDM sheet is unrolled and left to relax, then folded back and bonded to the deck in sections, with trapped air pressed out for a flat, tight finish.
Trims, Upstands and Final Review
Edge trims are fixed and upstands are sealed against walls and roof lights. Once the offcuts are cleared away, we review the completed work with you and confirm everything has been done as agreed.
FAQs
EPDM Rubber Roofing FAQs
How long does an EPDM rubber roof last?
Can I use an EPDM roof as a balcony?
Why are joints less of a problem on an EPDM roof?
Can a damaged EPDM roof be repaired?
What does an EPDM roof look like once finished?
Still Have a Question?
If your question is not answered here, get in touch and we will discuss it with you.
Get in touchAreas we cover
EPDM Rubber Roofs Fitted across Hertfordshire
We carry out epdm rubber roofing across Hertfordshire, Hampshire and Surrey. Choose your town to see the service there, or call to ask about anywhere nearby.
- Bishop's Stortford
- Borehamwood
- Cheshunt
- Hatfield
- Hemel Hempstead
- Hitchin
- St Albans
- Stevenage
- Watford
- Welwyn Garden City
- Hoddesdon
- Letchworth
- Harpenden
- Hertford
- Bushey
- Rickmansworth
- Potters Bar
- Berkhamsted
- Ware
- Royston
- Farnham
Related services
