TNR Roofing Services
Rolls of black rubber membrane laid out across a new flat roof, Hemel Hempstead
EPDM rubber roofing ยท Hemel Hempstead

EPDM Rubber Roofing in Hemel Hempstead

EPDM rubber roofs laid in a single sheet and repaired by a roofing contractor based in Hemel Hempstead, starting with a free survey.

Get a Free Quote 01442 971940

Request a Free Quote

Start with your name and number. It takes under a minute.

  • Free Roof Surveys
  • 24/7 Emergency Response
  • Fully Insured
  • Herts, Hants & Surrey

EPDM Rubber Roofing in Hemel Hempstead

Single-Sheet EPDM Rubber Roofing in Hemel Hempstead

TNR Roofing Services is based in Hemel Hempstead, so EPDM work across HP1, HP2 and HP3 is close to home for us. We lay single-sheet rubber membranes on extensions, garages, dormers and commercial flat roofs, and we repair punctures and lifted edges on rubber roofs already in place.

The finish is a plain matt black, neat at the edges and tidy from upstairs windows. What matters more is what sits under it: the membrane is bonded to the deck, so our free survey checks the boards for rot, movement and damp before we recommend rubber, for homes and commercial properties alike.

Get a Free Quote Call 01442 971940
Roofer rolling down the seam of a black rubber membrane

Reviews

Reviews from Customers across Hertfordshire

What homeowners and businesses say about TNR Roofing Services, roofers covering Hemel Hempstead and the rest of Hertfordshire.

Read Our Reviews on Google
New black rubber flat roof with a roof light on an extension

What's included

Our EPDM Rubber Roofing Services in Hemel Hempstead

The main parts of the job, each listed in your quote.

  • Flat roofs covered with a single EPDM rubber sheet, so there are no joins across the main area for water to find.
  • The membrane fully bonded with adhesive to a clean timber deck, new or repaired, so wind cannot lift it.
  • Upstands and corners formed at walls, with the rubber turned up to seal each junction.
  • Edge trims and gutter drip details fitted to hold the membrane securely and guide water off the roof.
  • Punctures, small tears and lifted edges on existing EPDM roofs repaired with compatible rubber patches and adhesive.
  • Larger commercial flat roofs re-covered in wide EPDM sheets that keep the number of seams to a minimum.
Get a Free Quote Call 01442 971940
More about our epdm rubber roofing service

Free EPDM Rubber Roofing Quotes in Hemel Hempstead

Free, no-obligation quotes for EPDM rubber roofing in Hemel Hempstead and across Hertfordshire.

Get a Free Quote 01442 971940

Pricing

EPDM Rubber Roof Costs in Hemel Hempstead

EPDM prices in Hemel Hempstead depend on the following, all assessed at your free survey:

  • The roof area and whether one EPDM sheet will cover it or a joined seam is needed
  • The condition of the existing deck and any boards to replace before the membrane is bonded
  • How many upstands, corners, pipes and roof lights the rubber has to be sealed around
  • The length and style of edge trims and gutter drip details required
  • Stripping the old covering and the access needed to reach the roof
New black rubber flat roof on a rear house extension

How it works

How We Fit EPDM Roofs in Hemel Hempstead

What happens from your first call to the finished work.

  1. Free Survey and Measuring

    We measure the roof to size the EPDM sheet and check the deck for rot, movement or damp, so the membrane, trims and adhesive in your quote match the real job.

  2. Stripping and Deck Preparation

    The old covering comes off, any damaged boards are replaced and the deck is swept clean, because the adhesive needs a dry, dust-free surface to bond to.

  3. Laying and Bonding the Rubber

    The sheet is unrolled and left to relax, then folded back and bonded to the deck in sections, with trapped air pressed out for a flat, tight finish.

  4. Trims, Upstands and Final Review

    Edge trims are fixed and upstands sealed at walls and roof lights. We clear the offcuts, then review the completed roof with you and confirm everything has been done as agreed.

Get a Free Quote 01442 971940

FAQs

Frequently Asked Questions

What does a finished EPDM roof look like?

A smooth, matt black surface with trims at the edges. It looks tidy from above, though it does not offer the colour choice of a GRP topcoat.

Why is the membrane left to relax before bonding?

Letting the unrolled sheet settle on the roof first helps it lie flat. We then fold it back and bond it to the deck in sections, pressing out trapped air, for a smooth and tight finish.

Do I need permission from Dacorum Borough Council to replace a flat roof?

Not normally, as re-covering an existing flat roof is treated as maintenance. For a listed home or one in a conservation area in HP1, HP2 or HP3, ask Dacorum Borough Council before the rubber roof goes on.

Are you insured for EPDM work?

Yes. We are fully insured with public liability cover, and we are a vetted Checkatrade member.

Still Have a Question?

If your question is not answered here, get in touch and we will discuss it with you.

Call us01442 971940Email usinfo@tnrroofingcompany.co.uk
Get in touch

Areas we cover

EPDM Rubber Roofing across Hertfordshire

Alongside Hemel Hempstead, we carry out EPDM rubber roofing in these towns:

Covering Hemel Hempstead and Hertfordshire

EPDM Rubber Roofing across Hemel Hempstead and the rest of Hertfordshire. Call to arrange a free survey and a quote.

Call 01442 971940
Call 01442 971940Get a Free Quote